"For Tommy Gun Shooters and Collectors"

Home - About Us - Contact Us - Policies - Sellers - Mailing List - Links

 

Thompson Gunsmith Services

Customized non NFA Kahr 1927A1 Deluxe with USGI Frame, Mag Catch (modified to accept full auto mags), Lyman Adjustable Sight, Selector Set, pivot plate, extractor, ejector, gripscrews, gripmount and stock hardware. Barrel is contoured and compensator is turned down and moved back over the barrel to reduce the OAL by 2". Frame comes off without the use of tools and the selector bolt hold open modification is installed. Tight grain, 21 style custom wood and flat milled ejector. You can see more pictures of the custom guns in our Research Area.

Here are some of the Tommy Gun Services available for fixing up vintage NFA items to customization of semiautomatic models. Depending on what services your order other services may or may not incur additional charges.  Contact Us with questions you may have and for a custom quote. Please read and agree to my Policies/Terms before using my site. Come back often for new items will be added regularly. *We will not build or convert to Full Auto and ALL ATF/NFA rules apply! NO EXCEPTIONS!* ALL GUNSMITH SERVICES ARE HANDLED BY J.G.I. or T.S.C. FFL and SOT holders respectively.

There is a current estimated backlog of  10-12 months on Non-NFA semiauto repair and 2-3 months for NFA repair..

Barrel Contouring
We can contour your semiautomatic barrel to resemble Colt 1921 or US 1928 spec.   $250

Selector Bolt Hold Open for Semiauto Frames
Labor Install forward selector bolt hold open feature on a 1927 model of semiautomatic Thompson that have a semiautomatic frame installed. Includes modifying internal semiautomatic parts. Includes marking selector positions "lock" and "unlock" or "open" and "closed". This modification will eliminate the need of a third hand. To complete this project a full auto fire control selector lever and pivot plate will be needed and is not included.                                                                                                                                     $335

Selector Bolt Hold Open Full Auto Frames
Labor Install forward selector bolt hold open feature on a 1927 model of semiautomatic Thompson that have a full auto frame installed.  Includes modifying internal semiautomatic parts. This modification will eliminate the need of a third hand. To complete this project a full auto fire control selector lever and pivot plate will be needed and is not included                                                                                                                   $315

Quick Change Barrel Setup
Labor to modify 1 barrel and gripmount to allow barrels to be swapped in the field. Set screw is located invisibly under the foregrip. Will not accept unmodified barrels.        $285

Additonal quick change barrel
Labor to modify 1additional  barrel to work with our quick change setup                     $125

Rebarrel and Headspace
Rebarrel and Headspace includes test fire and safety inspection.                                  $105

SBR Compliance Markings

We can add compliance markings to registered short barrel rifles.                                   $85

Shorten Semiautomatic Barrel w/ Cutts
Shorten semiautomatic barrel with Cutts Compensator for overal 16.5in length.           $125

Fit 1928 frame to Semi Receiver
Utilize all semiautomatic parts. Not a full auto conversion!                                               $170

Pin Cutts to Barrel
Pin Cutts compensator to barrel to resemble Colt spec                                                         $70

Turn Down Compensator
Turn down compensator to resemble slender early Colt models without markings          $60

Replace Forward Gripmount
Labor to remove barrel, replace front gripmount, reinstall barrel Headspace not included                                                                                                                                        $65

Install Lyman Adjustable Rear Sight
Labor to install Lyman rear sight includes custom step rivits                                             $95

Fill Mag Catch Hole and Checker
Done to resemble early Colt style                                                                                            $75

Modify and Fit Mag Catch
Modify and fit mag catch to allow semiautomatic to accept full auto mags without modification.                                                                                                                                $65

Mill Drum Divots
Mill Colt style drum divots into receiver slots for ease of drum installation.                    $75

Refinish, Bead Blast
Disassemble, refinish with fine bead blast, hot blue, reassemble and safety inspect     $250

Refinish, Bead Blast Disassembled
DIY and save! Bead blast and reblue your unassembled gun                                            $175

Add hole to paddle safety
Add hole to paddle safety selector to resemble early Colt style                                         $20

Tooless Frame Removal
Modify to allow for tooless frame removal like the original smg's                                      $55

Con

Contact Us for a Custom Quote

 
Home - About Us - Contact Us - Policies - Sellers - Mailing List - Links
Copyright © 2003 TommyGunner.com
All Rights Reserved
Website Development by iDamon.net